Clutch Release Bearing

Product Details:  Automotive Bearing                                                                                  

    Clutch release bearing are used into automotive clutch release system. We develop this bearing for many years, and also design as per customers' requirements. 

    Clutch release bearing is a relatively important part of the car. If the maintenance is not good, it will not only cause economic loss, but also it is quite troublesome to disassemble once, which requires a lot of man-hours. Therefore, it is important to understand the cause of the failure of the clutch release bearing and to maintain and maintain it properly during use, which is beneficial to prolonging the life of the separation bearing, improving labor productivity, and achieving better economic benefits.

    The clutch release bearing is mounted between the clutch and the transmission, and the split bearing seat is loosely sleeved on the tubular extension of the first shaft bearing cover of the transmission, and the shoulder of the release bearing is always pressed against the separation fork by the return spring, and is retracted to the final position. Keep a gap of about 3~4mm from the end of the separation lever (separation finger).

     Since the clutch pressure plate and the separating lever are synchronously operated with the engine crankshaft, and the separating fork can only move axially along the clutch output shaft, it is obviously impossible to directly disengage the separating lever with the separating fork. By separating the bearing, the separating lever can be rotated along one side. The clutch output shaft moves axially, ensuring smooth engagement of the clutch, soft separation, reduced wear and longer clutch life and overall drive train life.

Product Images:Automotive Bearing